Setting up reminders on Task is simple and quite handy because with so much to do, we are likely to miss or forget about other important tasks that might be due.
BUT the overwhelming part is when you are in the middle of something very important and the Reminder Pop-up comes with several tasks. There is two things you might do at this point:
- Click on the red X button to close the Pop-up screen or
- Select each individual task and set a snooze time for it to reappear later
The second option is time-consuming and frustrating when you’re in a middle of something important and have no time to waste.
Get frustrated no more, here is a simple tip that will let you “Select All” Tasks and snooze them all at once:
- When the Reminder Pop-up appears:
- Select the First item in the list
- Press Shift on your keyword
- Select the Last item. This should now select all the items in the list as shown below:
- Set the Snooze time from the drop-down
- Click Snooze
This should now snooze all the items in the list to the time specified by you so you can continue with your important task on hand.
Did you find this tip useful? let us know by leaving a comment below.
Looking for a simple Task Management tool for Outlook… try our eeminders for Outlook addin.
In the last post I showed you how most Outlook users were changing the subject of the emails to make the email findable later.
I don’t personally change the Subject of emails. Instead I use Email Tags to tag my emails with keywords for searching later.
My suggestion appeared to grab the attention of a lot of Outlook user’s who were till date changing the subject of their email BECAUSE there was no other way of making the emails findable. They requested me to elaborate more on what EmailTag was and how to use it.
I realized there might be others facing the same problem so thought to do a blog post explaining about Email Tags.
There has been a shift away from filing things into folders and to using tags/categories over the last few years. This can be seen in programs such as EverNote, Gmail, Picasa… Here is a simple way that you can apply tagging to your emails in Outlook.
Outlook’s built-in categories provide a good start to email tagging because they allow the same email to have more than one category.
Here is how Email Tags makes it even better.
How to tag an Outlook email using Email Tags
Email Tags adds a couple of buttons to your Outlook ribbon/toolbar.
Click Tag It to display the Email Tags screen.
Email Tags has built in intelligence to recommend tags to you. Alternatively you can type in a new tag or select a tag from your list of tags directly on that screen.
You can even choose to file the email out of your Inbox with the tag, all in one step.
Email Tags will also prompt you to tag your Sent Emails so that all your emails are organized properly.
How to search for emails that you have tagged in Outlook
The main reason for tagging emails is so that they are easy to find later. Finding tagged Outlook emails is easy if you’re a Email Tags user.
Just click the Search button on the Email Tags toolbar to display a full list of your tags.
Click on a Tag (in the list) and Outlook will carry out a Search and display all relevant emails to you.
If you haven’t tried Email Tags yet, you can download a fully functional 30 day trial to see just how easy it is to organize and find emails using tags instead of folders.
This again is NOT something that I do or recommend. I prefer to leave received emails exactly as they are. However several users asked if it was possible to change the Email Subject so that it is easier to find the email later.
- Open the email by double-clicking on it.
- In Outlook 2013/2010 , go to the Message tab > click the Actions button under the Actions group > click Edit Message
- For Outlook 2007 > Click Other Actions -> Edit.
- For Outlook 2003 > click Edit -> Edit message.
- Now make any changes that you need to (The Subject can also be changed even though it appears to be read-only).
- Click Save (or close the email and you will be prompted to Save it).
NOTE: I don’t personally change the Subject of emails. Instead I use Email Tags to tag my emails with keywords for searching later.
Let us know of any other ways you use to easily find your emails in Outlook by leaving a comment below.
If you use the Outlook Calendar or Tasks List to get your work done, here’s a quick tip on how to convert emails to appointments or tasks.
Why might you need this? Like me, you probably get a lot of requests to get things done via email. You also probably send many emails that you want to follow up on. I personally do not use my Tasks List or Calendar for this (I use eeminders for Outlook addin which lets me use my Inbox as my To Do list. However if you use your Tasks List or Calendar, this is what you can do.
Options 1: (FREE) Create a Task or Appointment from Emails
To create a Task or Calendar item from an email…
1. Make sure that your folders are displayed in Outlook.
2. Right-click on the email (and keep the right button pressed) and then drag-and-drop the email into your Calendar or Tasks folder. Three options will be displayed (Copy with Attachment, Copy with Text and Move with Attachment).
3. I normally select Move or Copy with Attachment. This allows me to open the resulting task (or calendar item) which has the email attached to it. I can then double-click on the attached email and Reply or Forward it as needed.
Option 2: File and create the appointment/task automatically when you click Send
If you send out a lot of emails that you need to follow up on, I would recommend QuickFile for Outlook. It automatically prompts you every time you send an email out. The email will be filed to the correct folder after it is sent and your follow-up task or calendar item will be created for you.
Option 3: Get your reminders at the top of your Inbox on the correct day and time
I have personally found that I forget to look at my Calendar and Task List and as a result many actions get left undone. I have started using eeminders which shows me what I need to work on at the top of my Inbox. You can watch a demo video or download a trial version of eeminders for Outlook from here.
I hope you find this tips useful.
Do you know of other ways to schedule your work and complete them on time?
Share it with us by leaving a comment below.
Welcome back folks… today we are sharing with you another tip which was shared by a Outlook user.
This is not something that I do myself but I am sharing this as several users indicated that they use these technique. Some background first…
Several readers said that they prefer to have emails that they need to follow up on in their Inbox i.e. after they have sent an email; they would like to have a copy of the email in their Inbox too. The two techniques shared by users were:
BCC Yourself on emails that you need to follow up on
This is easy… simply BCC yourself on emails that you are sending out and you want/need to follow up on.
After the email is sent, you will also receive a copy in your Inbox. Because you have BCC’ed yourself, the other recipients will not know that you were also a recipient.
Or Use a Rule to copy sent emails to your Inbox
You can also setup a Rule to copy ALL emails that you send to your Inbox. Once the email copies arrive in your Inbox, manually Delete the emails that you don’t need to follow-up on.
As mentioned earlier… I don’t use this technique myself but users say that the extra Delete step takes almost no time.
I personally think having copies of emails in your inbox that you will not be working on immediately can be distracting and unproductive… having so many emails in the inbox makes me feel I haven’t done my work today (when in fact I have)
How I personally organize my Follow-ups in Outlook you may ask?
Well in my most biased opinion… I personally use eeminders for Outlook and like the fact that it automatically pops a reminder for emails that I need to deal with on the day that I actually need to deal with it.
- This does not cause my Inbox to be cluttered with follow-up emails and
- I don’t have to scroll through emails to find the one I need to deal with. Eeminders reminders me when I need to work on a email.
There is no right or wrong way of doing this… it’s just a matter of preference so I leave the choice to you to choose the best method that suits your style of work.
If you are interested to try eeminders, you can download a fully functional 30 day trial from our website.
Let us know which method you prefer by leaving a comment below.
In one of our earlier tips from the 8 Simple tips for Email Management in Outlook series… I had mentioned to you that Outlook is configured (by default) to eventually corrupt itself and lose some or maybe even all your data?
Backing up your Outlook data is one way to avoid data loss but here is another way that you can ensure your data file size remains small and compact.
If you are following the email filing tips in our first report, then you are moving emails around a lot. When you move emails around, your Outlook data file (PST) ends up with a lot of empty space in it which makes the file bigger and performance slower.
To fix this…
- Open Outlook and display mail folders.
- Right-click over the PST file that you wish to compact
- Click Properties.
- Click the Advanced button.
- Click Compact Now.
This will now compact the data file and get rid of the empty spaces which is caused by moving emails.
This will result in your Outlook data file remaining small in size, faster Outlook performance and ultimately reduce the chance of losing your previous data.
I hope you find this tip useful.
Till next time… have a better Outlook.
Earlier this week we released our free special report titled: 8 Simple Tips for Email Management in Microsoft Outlook.
I was truly overwhelmed by the feedback I received from readers. Hundreds of users wrote back saying how the tips discussed in the ebook was already helping them.
“I have implemented your suggestions and it has improved my work flow already”
Norman (This was received few days after release of the report)
Other users (who were already using similar techniques) wrote back with their own ideas to further fine tune the Outlook Email Management System.
If you haven’t read the first report yet, I recommend you download and understand the ideas in that first. You can download the report now from:
In the next few weeks… I will be sharing the additional tips that has been shared with me by Outlook users. Remember these are tips that are being used by actual users and it has worked for them.
If you are struggling to manage your emails in Outlook… stay with us and follow the tips to overcome this common email overload problem.
TIP #1: Use Rules for Non-Actionable Items (e.g. newsletters)
In the first report, I said that you should “Think carefully before using Outlook Rules”. The main reason for this is that Rules shift emails out of your Inbox before you’ve had a chance to see them.
Like me, you probably use your Inbox as a To-Do list i.e. emails are kept in your Inbox until you have carried out the required action. This means you should avoid using Rules except…
We all receive emails that do not require immediate action (or for that matter any action)… how many email newsletters do you subscribe to that you want to read in your spare time. Getting those emails into your Inbox can be a bit of a distraction.
For those non-actionable emails, it makes sense to use Rules to move them out of your Inbox.
How to create a Rule
BEFORE creating the Rule, create a folder inside Outlook where you want the newsletter emails to be moved to. Then…
- Go to your Inbox
- In Outlook 2013/2010, Click the File tab > Click Manage Rules & Alerts. In the Rules and Alerts dialog box, on the E-mail Rules tab, click New Rule.
- In Outlook 2007/2003, click Tools > Click Rules & Alerts > Click New Rule to display the Rules Wizard
- “Move Messages from someone to a folder” will already be highlighted. (This example assumes that the newsletters come from the same email address – otherwise you can use one of the other predefined Rule Templates)
- Click “people or distribution list” to display the Rule Address screen.
- Choose a name from the list or type in the name in the “From” field and then click OK.
- Click the hyperlinked word “specified” to bring up the Choose Folder dialog. Select the desired folder from the list and then click OK.
Now that the Rule is created, any emails coming from the list will automatically be moved to the chosen folder.
You can also apply it to any emails that are already in the folder by going back to the Rules and Alerts screen and clicking the “Run Rules Now” button.
Try this tip… it surely has saved me several hours of time that was wasted moving or deleting this emails manually one at a time.
Hope you find this tip helpful… let us know if this works for you or not by leaving a comment below.
As promised… I have compiled all the 8 tips we have discussed over the past several weeks into a simple downloadable and printable PDF copy.
Use these simple tips to:
- Ensure that your Outlook data file does not get bloated, slow-down and eventually corrupt itself and die (causing possible loss of some if not all your e-mails)
- Backup the correct Outlook data files in case of hardware failure
- Organize your emails so that your E-mail Folders matches your paper filing structure
- File your e-mails in a way that lets you quickly see all correspondence (incoming, out-going, to and from anyone) for a project quickly and easily in one place
- Get some control over your e-mails and use your Inbox like a proper In-tray holding only the items that need your attention.
- Easily archive e-mails for completed projects with other electronic documents (Word files, Excel files etc) for the same project.
- Quickly find specific e-mails for a project.
Get your own copy of this FREE e-book now!!!
Next week I will be sharing some additional bonus tips which I feel will help you manage your emails even better… so do check in again.
Till next time… have a safe and better Outlook.
- Improve Security Awareness-Customize Outlook with Logo and Email Policies
- Checking Recipients before emails are sent out (GDPR and Outlook)
- Stop Legitimate emails from getting Junked
- Outlook Send Rules: Automatically CC (or BCC) contacts on outgoing emails
- Protect your company from wrongly sent Outlook emails
- Charity Projects
- Company News
- eeminders for Outlook
- Email Marketing
- Email Notes for Outlook
- EmailMerge for Outlook
- EmailTags for Outlook
- InsertText for Outlook
- MailSync For NetDocuments
- Office 365
- Office Tip
- Outlook 2010
- outlook 2013
- Outlook 2016
- Outlook as a Business Tool
- Outlook Calendar Tip
- Outlook Contacts Tips
- Outlook Data Backup
- Outlook Email Filing & Management Tip
- Outlook Email Tips
- Outlook Installation/Setup
- Outlook Mail Merge
- Outlook Performance
- Outlook Search Tips
- Outlook Shortcuts
- project management
- QuickFile for Outlook
- Sales and Marketing with Outlook
- Send Confirm
- SendGuard for Outlook
- Sending emails
- Signature Switch for Outlook
- Smart Schedules for Outlook
- SPAM Filtering in Outlook
- Special Discount Offers
- Windows Tip
- April 2018 (2)
- February 2018 (2)
- January 2018 (1)
- November 2017 (1)
- October 2017 (5)
- September 2017 (3)
- August 2017 (2)
- July 2017 (2)
- June 2017 (2)
- May 2017 (1)
- April 2017 (2)
- March 2017 (1)
- February 2017 (4)
- January 2017 (2)
- December 2016 (1)
- November 2016 (2)
- October 2016 (3)
- September 2016 (4)
- August 2016 (3)
- July 2016 (5)
- June 2016 (2)
- April 2016 (1)
- March 2016 (2)
- February 2016 (1)
- January 2016 (3)
- December 2015 (3)
- November 2015 (1)
- October 2015 (2)
- September 2015 (3)
- August 2015 (2)
- July 2015 (4)
- June 2015 (3)
- May 2015 (2)
- April 2015 (3)
- March 2015 (4)
- February 2015 (3)
- January 2015 (3)
- December 2014 (1)
- November 2014 (1)
- October 2014 (3)
- September 2014 (6)
- August 2014 (8)
- July 2014 (7)
- June 2014 (7)
- May 2014 (6)
- April 2014 (2)
- March 2014 (1)
- February 2014 (1)
- January 2014 (2)
- December 2013 (4)
- November 2013 (6)
- October 2013 (7)
- September 2013 (8)
- August 2013 (11)
- July 2013 (9)
- June 2013 (9)
- May 2013 (10)
- April 2013 (9)
- March 2013 (8)
- February 2013 (7)
- January 2013 (4)
- December 2012 (4)
- November 2012 (9)
- October 2012 (3)
- September 2012 (3)
- August 2012 (5)
- July 2012 (2)
- June 2012 (5)
- May 2012 (9)
- April 2012 (7)
- March 2012 (10)
- February 2012 (7)
- January 2012 (8)
- December 2011 (3)
- November 2011 (4)
- October 2011 (6)
- September 2011 (8)
- August 2011 (11)
- July 2011 (9)
- June 2011 (2)
- May 2011 (7)
- April 2011 (7)
- March 2011 (8)
- February 2011 (8)
- January 2011 (7)
- December 2010 (6)
- November 2010 (9)
- October 2010 (8)
- September 2010 (8)
- August 2010 (14)
- July 2010 (13)
- June 2010 (15)
- May 2010 (13)
- April 2010 (15)
- March 2010 (5)